Standards referred to

A1/2

BS 5080-1:1993 Structural fixings in concrete and masonry. Method of test for tensile loading. BS 8103-1:2011 Structural design of low-rise buildings. Code of practice for stability, site investigation, foundations, precast concrete floors and ground floor slabs for housing. BS 8103-2:2005 Structural design of low-rise buildings. Code of practice for masonry walls for housing. BS 8103-3:2009 Structural design of low-rise buildings. Code of practice for timber floors and roofs for housing. BS 8297:2000 Code of practice for design and installation of non-loadbearing precast concrete cladding. AMD 11064 2000, AMD 13018 2000. BS 8298-1:2010 Code of practice for the design and installation of natural stone cladding and lining. General. BS 8298-2:2010 Code of practice for the design and installation of natural stone cladding and lining. Traditional handset external cladding. BS 8298-3:2010 Code of practice for the design and installation of natural stone cladding and lining. Stone-faced pre-cast concrete cladding systems. BS 8298-4:2010 Code of practice for the design and installation of natural stone cladding and lining. Rainscreen and stone on metal frame cladding systems. BS 8500-1:2006+A1:2012 Concrete. Complementary British Standard toBS EN 206-1. Method of specifying and guidance for the specifier. BS 8500-2:2006+A1:2012 Concrete. Complementary British Standard to BS EN 206-1. Specification for constituent materials and concrete. BS EN 197-1:2011 Cement. Composition, specifications and conformity criteria for common elements. BS EN 197-2:2000 Cement. Conformity evaluation. BS EN 771-1:2011 Specification for masonry units. Clay masonry units. BS EN 771-2:2011 Specification for masonry units. Calcium silicate masonry units. BS EN 771-3:2011 Specification for masonry units. Aggregate concrete masonry units (dense and light-weight aggregates). AMD 16001. BS EN 771-4:2011 Specification for masonry units. Autoclaved aerated concrete masonry units. BS EN 771-5:2011 Specification for masonry units. Manufactured stone masonry units. BS EN 771-6:2011 Specification for masonry units. Natural stone masonry units. BS EN 845-1:2003+A1:2008 Specification for ancillary components for masonry. Ties, tension straps, hangers and brackets. AMD 14736 2003, AMD 15539 2006. BS EN 845-2:2003 Specification for ancillary components for masonry. Lintels. BS EN 845-3:2003+A1:2008 Specification for ancillary components for masonry. Bed joint reinforcement of steel meshwork. BS EN 998-2:2010 Specification for mortar for masonry. Masonry mortar. AMD July 2011. BS EN 1090-2:2008+A1:2011 Execution of steel structures and aluminium structures – Part 2: Technical requirements for the execution of steel structures. BS EN 1090-3:2008 Execution of steel structures and aluminium structures – Part 3: Technical requirements for aluminium structures. BS EN 1990:2002+A1:2005 Eurocode – Basis of structural design; with UK National Annex to BS EN 1990:2002+A1:2005. BS EN 1991-1-1:2002 Eurocode 1: Actions on structures – Part 1.1: General actions – Densities, self weight, imposed loads for buildings; with UK National Annex to BS EN 1991-1-1:2002. BS EN 1991-1-3:2003 Eurocode 1: Actions on structures – Part 1.3: General actions – Snow loads; with UK National Annex to BS EN 1991-1-3:2003. BS EN 1991-1-4:2005+A1:2010 Eurocode 1: Actions on structures – Part 1.4: General actions – Wind actions; with UK National Annex to BS EN 1991-1-4:2005+A1:2010. BS EN 1991-1-5:2003 Eurocode 1: Actions on structures – Part 1.5: General actions – Thermal actions; with UK National Annex to BS EN 1991-1-5:2003. BS EN 1991-1-6:2005 Eurocode 1: Actions on structures – Part 1.6: General actions – Actions during execution; with UK National Annex to BS EN 1996-1-6:2005. BS EN 1991-1-7:2006 Eurocode 1: Actions on structures – Part 1.7: General actions – Accidental actions; with UK National Annex to BS EN 1991-1-7:2006. BS EN 1991-3:2006 Eurocode 1: Actions on structures – Part 3: Actions induced by cranes and machinery; with UK National Annex to BS EN 1991-3:2006. BS EN 1992-1-1:2004 Eurocode 2: Design of concrete structures – Part 1.1: General rules and rules for buildings; with UK National Annex to BS EN 1992-1-1:2004. BS EN 1993-1-1:2005 Eurocode 3: Design of steel structures – Part 1.1: General rules and rules for buildings; with UK National Annex to BS EN 1993-1-1:2005. BS EN 1993-1-3:2006 Eurocode 3: Design of steel structures – Part 1.3: General rules – Supplementary rules for cold- formed members and sheeting; with UK National Annex to BS EN 1993-1-3:2006. BS EN 1993-1-4:2006 Eurocode 3: Design of steel structures – Part 1.4: General rules – Supplementary rules for stainless steels; with UK National Annex to BS EN 1993-1- 4:2006. BS EN 1993-1-5:2006 Eurocode 3: Design of steel structures – Part 1.5: Plated structural elements; with UK National Annex to BS EN 1993-1-5:2006. BS EN 1993-1-6:2007 Eurocode 3: Design of steel structures – Part 1.6: Strength and stability of shell structures. BS EN 1993-1-7:2007 Eurocode 3: Design of steel structures – Part 1.7: Plated structures subject to out of plane loading. BS EN 1993-1-8:2005 Eurocode 3: Design of steel structures – Part 1.8: Design of joints; with UK National Annex to BS EN 1993-1-8:2005. BS EN 1993-1-9:2005 Eurocode 3: Design of steel structures – Part 1.9: Fatigue; with UK National Annex to BS EN 1993- 1-9:2005. BS EN 1993-1-10:2005 Eurocode 3: Design of steel structures – Part 1.10: Material toughness and through-thickness properties; with UK National Annex to BS EN 1993-1-10:2005. BS EN 1993-1-11:2006 Eurocode 3: Design of steel structures – Part 1.11: Design of structures with tension components; with UK National Annex to BS EN 1993-1-11:2006. BS EN 1993-1-12:2007 Eurocode 3: Design of steel structures –Part 1.12: Additional rules for the extension of EN 1993 up to steel grades S 700; with UK National Annex to BS EN 1993-1-12:2007. BS EN 1993-5:2007 Eurocode 3: Design of steel structures – Part 5: Piling; with UK National Annex to BS EN 1993- 5:2007+A1:2012. BS EN 1993-6:2007 Eurocode 3: Design of steel structures – Part 6: Crane supporting structures; with UK National Annex to BS EN 1993-6:2007. BS EN 1994-1-1:2004 Eurocode 4: Design of composite steel and concrete structures – Part 1.1: General rules and rules for buildings; with UK National Annex to BS EN 1994-1-1:2004. BS EN 1995-1-1:2004+A1:2008 Eurocode 5: Design of timber structures – Part 1.1: General – Common rules and rules for buildings; with UK National Annex toBS EN 1995-1-1:2004+A1:2008. BS EN 1996-1-1:2005+A1:2012 Eurocode 6: Design of masonry structures – Part 1.1: General rules for reinforced and unreinforced masonry structures; with UK National Annex to BS EN 1996-1- 1:2005+A1:2012. BS EN 1996-2:2006 Eurocode 6: Design of masonry structures – Part 2: Design considerations, selection of materials and execution of masonry; with UK National Annex to BS EN 1996-2:2006. BS EN 1996-3:2006 Eurocode 6: Design of masonry structures – Part 3: Simplified calculation methods for unreinforced masonry structures; with UK National Annex to BS EN 1996-3:2006. BS EN 1997-1:2004 Eurocode 7: Geotechnical design – Part 1: General rules; with UK National Annex to BS EN 1997-1:2004. BS EN 1997-2:2007 Eurocode 7: Geotechnical design – Part 2: Ground investigation and testing; with UK National Annex to BS EN 1997-2:2007. BS EN 1998-1:2004+A1:2013 Eurocode 8: Design of structures for earthquake resistance – Part 1: General rules, seismic actions and rules for buildings; with UK National Annex to BS EN 1998-1:2004. BS EN 1998-5:2004 Eurocode 8: Design of structures for earthquake resistance – Part 5. Foundations, retaining structures and geotechnical aspects; with UK National Annex to BS EN 1998-5:2004. BS EN 1999-1-1:2007+A1:2009 Eurocode 9: Design of aluminium structures Part 1.1: General structural rules; with UK National Annex to BS EN 1999-1- 1:2007+A1:2009. BS EN 1999-1-3:2007+A1:2011 Eurocode 9: Design of aluminium structures Part 1.3: Structures susceptible to fatigue; with UK National Annex to BS EN 1999-1- 3:2007+A1:2011. BS EN 1999-1-4:2007+A1:2011 Eurocode 9: Design of aluminium structures – Part 1.4: Cold-formed structural sheeting; with UK National Annex to BS EN 1999-1-4:2007. BS EN 1999-1-5:2007 Eurocode 9: Design of aluminium structures – Part 1.5: Shell structures; with UK National Annex to BS EN 1999-1-5:2007. BS EN 12620:2002+A1:2008 Aggregates for concrete. AMD 15333 2004. BS EN 13670:2009 Execution of concrete structures. BSI PD 6687-1:2010 Published Document – Background paper to the UK National Annexes to BS EN 1992-1 and BS EN 1992-3. BSI PD 6688-1-1:2011 Published Document – Recommendations for the design of structures to BS EN 1991-1-1. BSI PD 6688-1-4:2009 Published Document – Background information the National Annex to BS EN 1991-1-4 and additional guidance. BSI PD 6688-1-7:2009 Published Document – Recommendations for the design of structures to BS EN 1991-1-7. BSI PD 6693-1:2012 Published Document – Recommendations for the design of timber structures to Eurocode 5: Design of timber structures Part 1: General – Common rules and rules for buildings. BSI PD 6695-1-9:2008 Published Document – Recommendations for the design of structures to BS EN 1993-1-9. BSI PD 6695-1-10:2009 Published Document – Recommendations for the design of structures to BS EN 1993-1-10. BSI PD 6697:2010 Published Document – Recommendations for the design of masonry structures to BS EN 1996-1-1 and BS EN 1996-2. BSI PD 6698:2009 Published Document – Recommendations for the design of structures for earthquake resistance to BS EN 1998. BSI PD 6702-1:2009 Published Document – Structural use of aluminium – Part 1: Recommendations for the design of aluminium structures to BS EN 1999. BSI PD 6705-3:2009 Published Document – Structural use of steel and aluminium – Part 3: Recommendations for the execution of aluminium structures to BS EN 1090-3.

A3

BS EN 1990:2002+A1:2005 Eurocode – Basis of structural design; with UK National Annex to BS EN 1990:2002+A1:2005. BS EN 1991-1-7:2006 Eurocode 1: Actions on structures – Part 1.7: General actions – Accidental actions; with UK National Annex to BS EN 1991-1-7:2006. BS EN 1992-1-1:2004 Eurocode 2: Design of concrete structures – Part 1.1: General rules and rules for buildings; with UK National Annex to BS EN 1992-1-1:2004. BS EN 1993-1-1:2005 Eurocode 3: Design of steel structures – Part 1.1: General rules and rules for buildings; with UK National Annex to BS EN 1993-1-1:2005. BS EN 1994-1-1:2004 Eurocode 4: Design of composite steel and concrete structures – Part 1.1: General rules and rules for buildings; with UK National Annex to BS EN 1994-1-1:2004. BS EN 1995-1-1:2004+A1:2008 Eurocode 5: Design of timber structures – Part 1.1: General – Common rules and rules for buildings; with UK National Annex to BS EN 1995-1-1:2004+A1:2008. BS EN 1996-1-1:2005+A1:2012 Eurocode 6: Design of masonry structures – Part 1.1: General rules for reinforced and unreinforced masonry structures; with UK National Annex to BS EN 1996-1-1:2005+A1:2012. BS EN 1999-1-1:2007+A1:2009 Eurocode 9: Design of aluminium structures – Part 1.1: General structural rules; with UK National Annex to BS EN 1999-1- 1:2007+A1:2009. BSI PD 6687-1:2010 Published Document – Background paper to the UK National Annexes to BS EN 1992-1 and BS EN 1992-3. BSI PD 6688-1-7:2009 Published Document – Recommendations for the design of structures to BS EN 1991-1-7. BSI PD 6693-1:2012 Published Document – Recommendations for the design of timber structures to Eurocode 5: Design of timber structures Part 1: General – Common rules and rules for buildings. BSI PD 6697:2010 Published Document – Recommendations for the design of masonry structures to BS EN 1996-1-1 and BS EN 1996-2. BSI PD 6702-1:2009 Published Document – Structural use of aluminium – Part 1. Recommendations for the design of aluminium structures to BS EN 1999.

  • 1 Size and proportion of residential buildings of not more than three storeys Diagram 1 Size and proportion of residential buildings of not more than three storeys
  • 2 Size and proportion of non-residential buildings and annexes Diagram 2 Size and proportion of non-residential buildings and annexes
  • 3 Determination of wall thickness Diagram 3 Determination of wall thickness
  • 4 Parapet walls - height Diagram 4 Parapet walls - height
  • 5 Maximum floor area enclosed by structural walls Diagram 5 Maximum floor area enclosed by structural walls
  • 6 Fig 1-2 - Map showing wind speeds in m per s for maximum height of buildings Diagram 6 Fig 1-2 - Map showing wind speeds in m per s for maximum height of buildings
  • 6 Fig 3 - Map showing wind speeds in m per s for maximum height of buildings Diagram 6 Fig 3 - Map showing wind speeds in m per s for maximum height of buildings
  • 7 Max height of buildings Diagram 7 Max height of buildings
  • 8 Measuring storey and wall heights Diagram 8 Measuring storey and wall heights
  • 9 Declared compressive strenght of masonry units Diagram 9 Declared compressive strength of masonry units
  • 10 Maximum span of floors Diagram 10 Maximum span of floors
  • 11 Differences in ground levels Diagram 11 Differences in ground levels
  • 12 Openings in a buttressing wall Diagram 12 Openings in a buttressing wall
  • 13 Buttressing Diagram 13 Buttressing
  • 14 Sizes of openings and recesses Diagram 14 Sizes of openings and recesses
  • 15 Lateral support by floors Diagram 15 Lateral support by floors
  • 16 Lateral support at roof level Diagram 16 Lateral support at roof level
  • 17 Size and location of openings Diagram 17 Size and location of openings
  • 18 Wall thinckness Diagram 18 Wall thinckness
  • 19 Lateral restraint at roof level Diagram 19 Lateral restraint at roof level
  • 20 Proportions for masonty chimneys Diagram 20 Proportions for masonry chimneys
  • 21 Elevation of stepped foundation Diagram 21 Elevation of stepped foundation
  • 22 Piers and chimneys Diagram 22 Piers and chimneys
  • 23 Foundation dimensions Diagram 23 Foundation dimensions
  • 24 Area at risk of collapse in the event of an accident Diagram 24 Area at risk of collapse in the event of an accident
  • Table 1 Areas at risk from house longhorn beetle Table 1 Areas at risk from house longhorn beetle
  • Table 2 Wall types considered in this section Table 2 Wall types considered in this section
  • Table 3 Minimum thickness of certain external walls, compartment Table 3 Minimum thickness of certain external walls, compartment
  • Table 4 Imposed loads Table 4 Imposed loads
  • Table 5 Cavity wall ties Table 5 Cavity wall ties
  • Table 6 Declared compressive strength of masonry units complying with BS EN 771-1 TO -5 [N PER nn SQ] Table 6 Declared compressive strength of masonry units complying with BS EN 771-1 TO -5 (N/mm SQ)
  • Table 7 Normalised compressive strength of masonry units of clay and calcium silicate blocks complying with BS EN 771-1 and 2 [Nn/mm SQ] Table 7 Normalised compressive strength of masonry units of clay and calcium silicate blocks complying with BS EN 771-1 and 2 (N/mm SQ)
  • Table 8 Value of Factor X - see Dia 14 Table 8 Value of Factor 'X' (see Dia 14)
  • Table 9 Lateral support for walls Table 9 Lateral support for walls
  • Table 10 Minimum width of strip footings Table 10 Minimum width of strip footings
  • Table 11 Building consequence Table 11 Building consequence